Just got a package from Wildman

H and up. The skies the limit.

Re: Just got a package from Wildman

Postby Jim Z » Mon Oct 12, 2015 7:15 pm

Holy Crabapples!! That thing is huge!!! Mega Impressive!!! :D
Jim Z
NAR 91938 L2
Jim Z
 
Posts: 1482
Joined: Sun Sep 16, 2012 11:32 pm
Location: Jersey City, NJ

Re: Just got a package from Wildman

Postby onebadhawk » Tue Oct 13, 2015 1:10 pm

Ya have to get 1.5" angle aluminum from Lowes or Home Cheapo to bring those fin slots up...
Have Chris hold it tight with you..
It's easier then you think to get those lines off even with angle iron..
Please don't ask me how I know this... lol...

Teddy
Ted Chernok
NAR # 87063 SR
Tripoli # 14443
Level 2
onebadhawk
 
Posts: 1403
Joined: Sun Jan 13, 2013 11:12 am
Location: Old Bridge, New Jersey

Re: Just got a package from Wildman

Postby Plastic_Gorilla » Thu Oct 15, 2015 11:50 am

I love using the aluminum angles, they do work great. but if you have a fiberglass tube put some clamps on it, it is pretty easy to move (i have been there teddy)

p
Plastic_Gorilla
 
Posts: 163
Joined: Tue Oct 16, 2012 10:28 pm

Re: Just got a package from Wildman

Postby smarra01 » Thu Oct 15, 2015 2:25 pm

I have always found the aluminum 6ft level to work the best.

If the 10 ft level didn't cost over $300 I'd get one.

Looks like I'll hit Home Cheapo tonight and pick up the aluminum angle.
smarra01
 
Posts: 181
Joined: Wed Mar 06, 2013 7:41 pm

Re: Just got a package from Wildman

Postby smarra01 » Sun Oct 18, 2015 3:10 pm

Made a lot of progress today.

Nothing glued yet, but a lot a prep work is completed.

Got the lines all marked out for shear pins, screws, vent holes, etc...
Made sure the AV Bay vent holes are in clear air.

punisher lines.JPG


The motor mount tube is dry fit with the retainer.
Still need to sand the out rings so they fit into the tube.

punisher MMT.JPG


Cut out and dry fit a centering ring for the removable nose cone bulk head.

punisher removable nose.JPG


Purchased some misc hardware

punisher hardware.JPG
smarra01
 
Posts: 181
Joined: Wed Mar 06, 2013 7:41 pm

Re: Just got a package from Wildman

Postby onebadhawk » Sun Oct 18, 2015 5:04 pm

Steve the prep is tedious and is most important...
No rush..
This is all important...
This step will set the tone for the way the rest of the build goes...

Man did you do something right or what...
I am most certain Chris has girls beatin down your door,,
and he's hangin out with pop buildin a rocket..........

Good for you man......

Teddy
Ted Chernok
NAR # 87063 SR
Tripoli # 14443
Level 2
onebadhawk
 
Posts: 1403
Joined: Sun Jan 13, 2013 11:12 am
Location: Old Bridge, New Jersey

Re: Just got a package from Wildman

Postby smarra01 » Sun Nov 15, 2015 3:21 pm

Football is finally over, made some progress on the av-bay today after almost a month of no progress.

avbay1.JPG


avbay2.JPG


avbay3.jpg
smarra01
 
Posts: 181
Joined: Wed Mar 06, 2013 7:41 pm

Re: Just got a package from Wildman

Postby smarra01 » Fri Nov 20, 2015 9:41 pm

Motor mount with custom Onebadhawk Y harness.

Cert flight just might need to be on a Loki 3000 :D

punisher_onebadhawk_harness2.jpg
smarra01
 
Posts: 181
Joined: Wed Mar 06, 2013 7:41 pm

Re: Just got a package from Wildman

Postby onebadhawk » Tue Nov 24, 2015 1:28 pm

Wow,,
Nice harness Steve...lol...
I hope it's OK if I steal uugggmmm borrow that pic.....

Teddy
Ted Chernok
NAR # 87063 SR
Tripoli # 14443
Level 2
onebadhawk
 
Posts: 1403
Joined: Sun Jan 13, 2013 11:12 am
Location: Old Bridge, New Jersey

Re: Just got a package from Wildman

Postby smarra01 » Wed Nov 25, 2015 6:54 pm

No problem Teddy, go right ahead.
smarra01
 
Posts: 181
Joined: Wed Mar 06, 2013 7:41 pm

PreviousNext

Return to High Power Rocketry

Who is online

Users browsing this forum: No registered users and 1 guest

cron